Chair covers are very useful, especially if you are using some rare and expensive pieces of furniture. They offer protection against spills and damages that can be inflicted by regular wear and tear. Even the regular chairs today can be quite expensive and some of the fabrics used on them are not really meant for heavy duty use. It makes sense to use a chair cover that can offer protection. Covers can withstand a lot of rough handling and they are not as expensive as the chair itself so it would be better to spill something on a cover and just have it replaced or cleaned which is another benefit of chair covers. They’re easier to clean.
Another reason why people use chair covers is to give a more attractive appearance to ordinary looking chairs especially for special occasions. By using covers, different chairs can be made to look alike, which gives the occasion a more themed appearance.
When you need a chair cover for tub chair you need to bear in mind that the material from which the cover is made will play a crucial role in determining whether it will be a good one or not. There are several fabrics that are normally used for chair covers. Spandex, satin, and polyester are three of the most usually used items for this purpose. Spandex is popular because it can be stretched quite easily and so can fit different kinds of chairs without any problems. Spandex can be stretched to as much as 60% of its size. Spandex chair covers also fit the chair more snugly because of this stretchability. Other materials such as satin is preferred for special occasions where a touch of elegance is needed.
Covers for chairs like the tub chair are quite affordable but if you are the do it yourself kind of person then here are some steps on how you can create your own tub chair cover:
1. Measure the chair dimensions, if the chair has a cushion then include the measurement of the cushion as well. Measure the back, the top, the arm rests, and the height of the seat. Remember that measurements will play an important role in the making of good chair covers.
2. Take the fabric that you will be using and place it on top of the chair, make marks on it for the important parts of the seat. You can use that as a guide when you are cutting the fabric.
3. Start cutting the fabric, using the measurements that you have taken and the marks that you have made as guides. Remember to leave an inch or two of fabric to be used when you are sewing for the seams and for a margin of error.
4. Put the pieces that you cut out on top of the parts of the chair that they will be covering. Remember to place it inside out because you need the stitches to be on the inside when you use it. Use pins to hold it together.
5. Start sewing with large stitches for starters using a needle and thread. Make sure that you follow a uniform size for the stitching.
6. Remove the pieces of fabric.
7. Start sewing it on the sewing machine.
8. Turn the fabric over and then fit it on the tub chair. Make sure that it fits well. Arguably, you’ll need to have some understanding of sewing and using fabrics, but the rewards are great when making your own tub chair covers not the least of which is pride and a renewed sense of confidence in your abilities. However, one benefit that you will likely not experience with making your own chair seat covers is that of saving money. With cheap labor and production in many other areas of the world, cheap covers for tub chairs can be had in store.